April 15, 1999 Harry Winter, Personal Instruments , medium Performance DSO

PCMCIA model PC-Card-DSO 262a - ANALOG BANDWIDTH: - 200 MHz

MAX. SAMPLE RATE, EQUIV. TIME:------------------------ 5 Giga Samples/sec.

SINGLE-SHOT:------------------------------------ 100 Kilo S/sec. (50 KHz)

(Second Generation design with ( 10 bit ADCs -------20 Mega Samples/sec. )

NUMBER CHANNELS:---------------------------------- 2 (+ 1 Trigger Channel)

NUMBER OF HORIZ. SAMPLES: 250 to 1000 (In Realtime mode: streaming to host

VERT. SENSITIVITY RANGE:----------------------(2mV*) 20mV/div. to 5V/div.

VERTICAL RESOLUTION: ---------------8-bit default,10-bits (on SVGA screen)

VERTICAL GAIN ACCURACY:-------------------------------- 0.5% (0.1%, 10bit)

TIME-BASE RANGE:----------------------------------------- 2ns/div. 5s/div.

TIME-BASE ACCURACY: --------------------------------------------------0.1%

MAX. TRIGGER FREQUENCY: -------------------------------------------200 MHz

TRIGGER CONTROLS:-------------- Channel A, Exteral Input Level, +/- Slope,

Hystoresis,----------- Hold-off 10 div.POST TRIG. DELAY: 0 to 90 Divisions

SPECIAL FEATURES: ------Time-Base Zoom Expansion (Dual Time-Base Windowing)
ANTIALIASING FEATURE,(Incremental 10x Oversampling) Auto probe (switch/type)
sensing, Auto Calibration, Auto Setup, TDR function

POWER: PC-card-dso 262a 5V DC 75mA from PCMCIA socket

PCMCIA to USB connector-plug Also switches circuits to USB

POWER: USB-dso 262a (less than a single USB-load)

Both interfaces, PCMCIA and USB are on the DSO-card
and one must be selected for either application.

OPTIONAL ACCESSORY: 1 MegOhm FET active-probe $50, * 2mV/DIV

----------------------------------------------------------------

Standard: IVI foundation; Windows + Windows/CE software included.

Optional: Instrument driver DLL for G, C, C++, and Visual Basic.

LabVIEW, LabWindows/CVI, VirtualBench